Brother QL-1110NWB Manual

The Brother QL-1110NWB is a high-speed, network-ready label printer designed for professional and office use. It features wireless and Ethernet connectivity, supports a wide range of label sizes, offers fast printing speeds, and includes Brother's P-touch Editor software for custom label design. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Printer unit, Power adapter, Starter roll of labels, Installation CD (software/drivers), Quick Setup Guide.

Installation

Unpack and inspect contents. Place on a stable, flat surface near a power outlet.

1. Connect power: Plug the AC adapter into the printer and then into a wall outlet.
2. Load labels: Open the media cover, insert the label roll with the printable side facing down, and close the cover.
3. Connect to computer: Use the USB cable for direct connection, or proceed to network setup.
4. Install software: Insert the CD or download drivers from the Brother website.

WARNING! Use only Brother-approved labels and accessories. Do not touch the print head directly.

First-Time Setup

Power on the printer; the Status LED will light. Follow installation wizard on your computer.

1. Install drivers: Run the setup software from CD or downloaded file.
2. Configure connection: Select USB, Ethernet, or Wireless setup as prompted.
3. Test print: Print a test page via the printer properties to verify installation.
4. Configure network (if applicable): Use the Brother Web BRAdmin tool or control panel to set IP address and wireless settings.

CAUTION! Ensure the printer is on a stable surface and ventilation openings are not blocked.

Specifications

• Model: Brother QL-1110NWB.
• Print Technology: Direct Thermal.
• Max Print Width: 62mm (approx. 2.4 inches).
• Print Speed: Up to 150mm/sec.
• Interface: Hi-Speed USB 2.0, Ethernet 10/100BASE-TX, Wireless LAN IEEE 802.11b/g/n.
• Supported OS: Windows, macOS, Linux.
• Power Requirements: AC 100-240V, 50/60Hz.
• Dimensions (WxDxH): Approx. 5.9 x 7.9 x 6.7 inches.
• Weight: Approx. 4.2 lbs.

Controls and Settings

Front Panel: POWER button, FEED button, Status LED. Access settings via software or network interface.

Software Control: Use P-touch Editor for design, Printer Settings utility for configuration.

Printer Settings: Label size, Print density, Cut option (Auto/Chain/None), Network configuration (IP, wireless security). Tools: Firmware update, Print head cleaning, Counter reset. Defaults: Most settings can be restored to factory default via the FEED button sequence.

Connecting to Network

Ethernet: Use RJ-45 cable to connect to router. Wireless: Configure via WPS or manual setup.

1. Wired: Connect Ethernet cable to printer and router. The printer will obtain an IP address automatically (DHCP).
2. Wireless (WPS): Press and hold the FEED button for 5 seconds until the Status LED blinks, then press your router's WPS button within 2 minutes.
3. Wireless (Manual): Use the Brother Web BRAdmin tool or installation software to select your SSID and enter the password.
4. Verify: Print a network configuration report by holding the FEED button while turning the power on.

Tip: Ensure your network supports the printer's protocol (802.11b/g/n) and has a strong signal.

Printing Labels

Supports printing from various applications and dedicated label software.

1. Design label: Use P-touch Editor, or print from other applications (Word, Excel, etc.).
2. Select printer: Choose "Brother QL-1110NWB" as the printer in your application.
3. Set properties: Configure label size, orientation, and print quality in the print dialog.
4. Print: Click Print. The printer will automatically feed and cut the label.
5. Manual feed: Press the FEED button to advance the label without printing.
6. Chain printing: Enable in settings to print multiple labels without cutting between them.
7. Adjust density: Use printer settings to make print darker or lighter.

WARNING! Do not use labels that are wrinkled, damaged, or exceed the maximum width. Never open the media cover during printing.

Software & Utilities

P-touch Editor: Design custom labels with text, graphics, barcodes, and sequential numbering. Brother Utilities: Configure printer settings, monitor status, update firmware. Drivers: Ensure you have the latest drivers from the Brother website for optimal performance.

Maintenance & Cleaning

Unplug the printer before cleaning. Use a dry, lint-free cloth to wipe the exterior. Clean the print head and roller periodically with a cotton swab and isopropyl alcohol.

CAUTION! Do not use abrasive cleaners or sprays. Allow the printer to cool before cleaning internal parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential installation. ICES-003: Complies with Canadian EMI regulations. This product meets ENERGY STAR® guidelines for energy efficiency. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Reset: Restore network settings to default by holding FEED button while powering on, then release when LED flashes.

Service: 1-877-276-8437; support.brother.com