Brother QL-1060N Manual

The Brother QL-1060N is a high-speed, direct thermal label printer designed for networking and high-volume printing applications. It supports Ethernet connectivity, features a fast print speed, and is compatible with various label sizes. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Direct thermal print mechanism, Ethernet port, USB port, Front control panel, Label exit slot, Power connector.

Feature	Description
Print Method	Direct thermal
Connectivity	Ethernet 10/100BASE-TX, USB 2.0
Print Speed	Up to 106mm/sec
Maximum Resolution	300 dpi
Media Types	Die-cut labels, continuous labels
Media Width	Up to 62mm
Memory	8MB DRAM, 4MB Flash
Control Panel	LED indicators, Feed button
Power Source	AC adapter
Supported OS	Windows, macOS, Linux

Installation

Unpack and inspect contents. Place on stable, flat surface near power outlet and network connection.

1. Connect power: Plug AC adapter into printer and wall outlet.
2. Connect to computer: Use USB cable for direct connection.
3. Connect to network: Use Ethernet cable to router/switch.
4. Install labels: Open cover and load label roll.

WARNING! Do not place near heat sources or in direct sunlight. Ensure ventilation around printer.

First-Time Setup

Power on printer; install drivers and software.

1. Install software: Insert CD or download from Brother website; follow on-screen instructions.
2. Configure network: Use Brother utilities to set IP address (DHCP or manual).
3. Calibrate sensor: Print configuration label to adjust media sensor.
4. Test print: Print test page to verify operation.

CAUTION! Handle labels with clean hands; avoid touching print head.

Specifications

• Model: Brother QL-1060N.
• Print Technology: Direct thermal.
• Print Speed: Up to 106mm/sec.
• Resolution: 300 dpi.
• Media Width: 12mm to 62mm.
• Media Thickness: 0.06mm to 0.25mm.
• Connectivity: Ethernet, USB 2.0.
• Power Consumption: 24V DC, 1.5A.
• Operating Environment: 10°C to 32.5°C, 20% to 80% humidity.
• Dimensions: 142mm (H) x 180mm (W) x 279mm (D).

Controls and Settings

Front Panel: Power LED, Error LED, Online LED, Feed button.

Software Settings: Access via Brother utilities or printer driver. Print density: Adjust for label darkness. Media type: Select die-cut or continuous. Sensor calibration: Auto or manual. Network: IP configuration, protocol settings.

Configuration Label: Print by holding Feed button while powering on; shows current settings.

Connecting to Network

Ethernet: Use RJ-45 cable to network.

1. Connect Ethernet cable to printer and router.
2. Power on printer; LEDs indicate connection.
3. Use Brother Network Configuration to set IP (default: DHCP).
4. Test connectivity by printing network configuration label.

Tip: Assign static IP for stable network printing in business environments.

Loading Labels

Supports die-cut and continuous labels up to 62mm wide.

1. Open printer cover: Press cover release button.
2. Insert label roll: Place roll on holder with label feeding from bottom.
3. Thread labels: Guide under media guide and through exit slot.
4. Close cover: Ensure it clicks shut.
5. Calibrate: Printer auto-calibrates or press Feed button to adjust.

WARNING! Use only Brother-approved labels. Do not use paper with adhesive backing unsuitable for thermal printing.

Printing Operations

Print from various applications using installed driver.

1. Select printer: Choose QL-1060N in application print dialog.
2. Configure label: Set size, orientation, quantity in printer properties.
3. Print: Send job; printer processes quickly.
4. Pause/cancel: Use Feed button or software to stop print job.
5. Monitor status: LEDs indicate printing, error, or online state.

Note: For batch printing, use label design software like Brother P-touch Editor.

Maintenance & Cleaning

Unplug before cleaning. Regularly clean print head and roller.

1. Print head: Use isopropyl alcohol and lint-free cloth; wipe gently.
2. Roller: Use dry cloth to remove dust and debris.
3. Exterior: Wipe with dry cloth; no liquids.

CAUTION! Do not use abrasive materials or solvents. Allow printer to cool before cleaning.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE marked for European compliance. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not powering on	Power connection	Check AC adapter and outlet; ensure secure connection.
No print output	Label loading/driver	Reload labels; calibrate sensor; reinstall driver.
Poor print quality	Print head/density	Clean print head; adjust print density in settings.
Network not detected	Cable/configuration	Check Ethernet cable; verify IP settings; restart printer.
Paper jam	Label misalignment	Open cover, remove jammed label; reload correctly.

Reset: Turn off, hold Feed button, turn on until LEDs flash to restore defaults.

Service: 1-877-276-8437; support.brother.com