Brother MFC-L8650CDW Manual

The Brother MFC-L8650CDW is a color laser All-in-One printer featuring print, copy, scan, and fax capabilities. It offers high-speed printing up to 33ppm (black & color), automatic duplex printing, wireless and network connectivity, a large color touchscreen, and support for various paper sizes and types. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Color laser engine, Automatic Document Feeder (ADF), Large color touchscreen, Paper trays, Toner cartridges (Black, Cyan, Magenta, Yellow), Network and USB ports.

Installation & Setup

Unpack and inspect contents. Place on a stable, level surface near a power outlet and network connection.

1. Install toner cartridges: Open front cover, remove packing materials, insert cartridges in correct color slots.
2. Load paper: Adjust paper guides in tray, load plain paper face down.
3. Connect power: Plug power cord into printer and wall outlet.
4. Connect to computer/network: Use USB cable, Ethernet cable, or configure Wi-Fi.
5. Install software: Insert CD or download drivers from Brother website.

WARNING! Toner cartridges are heavy; handle with care. Avoid touching the green drum surface.

First-Time Configuration

Power on printer; follow on-screen prompts and software installation wizard.

1. Language/Region: Select preferred language and country on touchscreen.
2. Network setup: Choose wired (Ethernet) or wireless connection; enter Wi-Fi password if needed.
3. Date/Time: Set current date and time for fax and log accuracy.
4. Print alignment: Run automatic print alignment from maintenance menu.
5. Test print: Print a configuration page to verify setup.

CAUTION! Ensure proper ventilation; do not block vents. Keep away from heat sources.

Specifications

• Printer Type: Color laser All-in-One (Print, Copy, Scan, Fax).
• Print Speed: Up to 33 ppm (black & color).
• First Print Out Time: Less than 10 seconds.
• Monthly Duty Cycle: Up to 3,000 pages.
• Scanner Type: Flatbed + ADF, color CIS.
• Fax: Super G3, 33.6 Kbps, 100-page memory.
• Paper Sizes: Letter, Legal, A4, A5, B5, envelopes.
• Connectivity: Hi-Speed USB 2.0, 10/100/1000 Ethernet, Wi-Fi 802.11 b/g/n.
• Power Consumption: Approx. 560W (printing), 65W (ready), 1.4W (sleep).
• Operating Environment: Temperature 50-90°F (10-32°C), Humidity 20-80% RH.

Controls and Settings

Access functions via 5-inch color touchscreen or control panel buttons.

Control Panel: Power, Home, Copy, Scan, Fax, Eco, Menu, Navigation arrows, OK, Back.

Menu Settings: Network (Wi-Fi setup, TCP/IP), Print (density, quality), Copy (zoom, darkness, collate), Scan (format, destination), Fax (speed dial, header), Maintenance (clean, alignment, reports), Initial Setup (language, reset).

Eco Mode: Reduces toner usage and power consumption.

Connecting to Network

Wired: Connect Ethernet cable to router and printer. Wireless: Use WPS or manual setup.

1. From touchscreen: Menu > Network > Wireless > Setup Wizard.
2. Select your network from list, enter password.
3. Confirm connection by printing network configuration report.
4. For mobile printing: Install Brother iPrint&Scan app, ensure device is on same network.

Tip: Place printer within range of Wi-Fi router for stable connection.

Printing & Copying

Supports various document types and media.

1. Printing from computer: Select "Brother MFC-L8650CDW" as printer, adjust settings in print dialog.
2. Copying: Place original on glass or in ADF, press Copy on panel, set number of copies, darkness, size, press Start.
3. Duplex printing/copying: Enable in print driver or copy settings for automatic two-sided output.
4. Multiple pages per sheet: Select N-up printing in driver to save paper.
5. Envelope printing: Load envelopes in tray, select envelope media type in settings.

WARNING! Do not touch fuser unit inside printer; it is hot during and after operation.

Scanning & Faxing

Scan to email, network folder, USB, or cloud services. Send/receive faxes.

1. Scanning: Place document, press Scan, choose destination (PC, email, USB), select format (PDF, JPEG), press Start.
2. Faxing: Enter number using keypad on screen, press Start. Set up speed dial for frequent numbers.
3. Receive fax: Set mode to Auto for automatic reception, or Manual to answer manually.
4. Fax forward: Program to forward received faxes to another number or email.

Maintenance & Supplies

Replace toner, clean printer, check consumables.

• Toner replacement: Open front cover when prompted, replace empty cartridge.
• Drum unit life: Approx. 30,000 pages. Replace when message appears.
• Cleaning: Wipe exterior with dry cloth; clean scanner glass with soft, lint-free cloth.
• Paper jam removal: Follow on-screen instructions; open rear cover and duplex unit to clear jams gently.

CAUTION! Use only genuine Brother toner and drums. Unplug before cleaning interior.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. Energy Star® certified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Reset: Menu > Initial Setup > Reset > Reset All Settings (caution: erases network settings).

Service: 1-877-276-8437; support.brother.com