Brother MFC-L8610CDW Manual

The Brother MFC-L8610CDW is a color laser all-in-one printer featuring print, copy, scan, and fax capabilities. It offers high-speed printing up to 33ppm (mono) and 28ppm (color), automatic duplex printing, wireless and Ethernet connectivity, a large paper capacity, and a 3.7-inch color touchscreen. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Color laser engine, 3.7-inch color touchscreen, Automatic Document Feeder (ADF), paper trays, toner cartridges, control panel buttons, and connectivity ports.

Installation

Unpack and inspect contents. Place on a stable, level surface near a power outlet and network connection.

1. Remove all packaging materials and tapes from inside and outside the printer.
2. Install toner cartridges: Open front cover, remove packing materials, insert cyan, magenta, yellow, and black cartridges until they click.
3. Load paper: Pull out paper tray, adjust guides, load paper, and reinsert tray.
4. Connect power cord and plug into AC outlet.
5. Turn on the printer using the power switch.

WARNING! Do not touch the green drum surface of toner cartridges. Keep printer away from heat sources and humidity.

First-Time Setup

Power on the printer; follow on-screen prompts on the touchscreen.

1. Initial setup: Select language, country, date, and time.
2. Install print driver: Insert installation CD or download from Brother website, follow on-screen instructions.
3. Network setup: Connect via Ethernet cable or use wireless setup wizard to join Wi-Fi network.
4. Align cartridges: Printer will automatically print an alignment page; follow prompts to complete.
5. Test print: Print a configuration page to verify setup.

CAUTION! Ensure proper ventilation; do not block vents on sides and rear.

Specifications

• Type: Color Laser All-in-One (Print, Copy, Scan, Fax).
• Print Speed: Up to 33ppm (mono), 28ppm (color).
• First Print Out Time: Less than 10 seconds.
• Monthly Duty Cycle: Up to 3,000 pages.
• Paper Sizes: Letter, Legal, Executive, A4, A5, B5, envelopes, labels.
• Scan Resolution: Up to 1200 x 1200 dpi (optical).
• Fax Memory: Up to 256 pages.
• Display: 3.7-inch color touchscreen.
• Connectivity: Hi-Speed USB 2.0, Ethernet 10/100/1000, Wi-Fi 802.11b/g/n.
• Power Consumption: Approx. 570W (printing), 65W (ready), 1.4W (sleep).
• Dimensions (WxDxH): 16.5" x 18.1" x 16.3".
• Weight: Approx. 57.3 lbs.

Controls and Settings

Access menus via the 3.7-inch color touchscreen. Control Panel: Power, Home, Back, Start, Stop, Navigation arrows, OK.

Touchscreen Menus: Home screen provides shortcuts to Print, Copy, Scan, Fax, Settings, and Network.

Print Settings: Quality (Draft, Normal, Fine), Color/Mono, Duplex, Paper Size/Type, Collate. Copy Settings: Number of copies, Darkness, Reduce/Enlarge, 2-sided copy. Scan Settings: Scan to Email, Network, USB, File Format (PDF, JPEG), Resolution. Fax Settings: Dial mode (Tone/Pulse), Fax header, Redial. Network: Wi-Fi setup, Ethernet configuration, Brother utilities. Maintenance: Clean drum, firmware update, reset network settings.

Connecting to Network

Ethernet: Use RJ-45 cable to connect to router. Wireless: Use WPS or manual setup via touchscreen.

1. Turn on printer and navigate to Network > Wireless.
2. Select your network from list or enter SSID manually.
3. Enter Wi-Fi password if required.
4. Confirm connection; print network configuration page to verify.
5. For wired connection, plug Ethernet cable into printer and router.

Tip: Ensure router is on and within range for wireless setup. Use Brother Web Connect for remote management.

Printing & Copying

Supports various paper types and sizes.

1. Printing: Send print job from computer or mobile device. Select printer, adjust settings in print dialog.
2. Copying: Place original on scanner glass or in ADF. Use touchscreen to set copies, darkness, size, then press Start.
3. Duplex: Enable in settings for automatic two-sided printing/copying.
4. Multiple copies: Use numeric keypad on touchscreen to set quantity.
5. Reduce/Enlarge: Select percentage or preset sizes (Letter to A4, etc.).
6. Collate: Enable to organize multi-page copies in sets.

WARNING! Do not touch the scanner glass or ADF rollers with fingers; use clean, smooth originals only.

Scanning & Faxing

Scan to USB, network, email, or cloud services. Fax using phone line.

1. Scanning: Place document, select Scan on touchscreen, choose destination (Email, Network, USB), adjust settings, press Start.
2. Faxing: Connect phone line to LINE port. Place document, enter recipient number using keypad, press Start. Use speed dial for stored numbers.
3. Fax memory: Stores received faxes if out of paper or toner.
4. Scan to Email: Requires SMTP server setup via Brother Web Based Management.

Note: For scanning to PC, install Brother software or use TWAIN/WIA driver.

Maintenance & Supplies

Replace toner cartridges when low or empty. Clean printer regularly.

1. Toner replacement: Open front cover, remove old cartridge, unpack new one, insert until click, close cover.
2. Drum unit life: Replace when message appears (approx. 30,000 pages).
3. Cleaning: Use dry, lint-free cloth to clean exterior and scanner glass. Do not use alcohol or solvents.
4. Paper jam: Follow on-screen instructions to clear jams from trays, duplex unit, or fuser area.
5. Firmware updates: Check periodically via Brother website or Web Based Management.

CAUTION! Turn off and unplug printer before cleaning. Use only Brother genuine supplies.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star certified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437. Waste Electrical and Electronic Equipment (WEEE) directive compliant.

Troubleshooting

Reset: Go to Settings > General Settings > Reset Settings if needed.

Service: 1-877-276-8437; support.brother.com