Brother MFC-L2710DN Manual

The Brother MFC-L2710DN is a monochrome laser Multi-Function Center featuring printing, scanning, copying, and faxing capabilities. It offers fast printing speeds up to 30ppm, automatic duplex printing, a 250-sheet paper tray, wired network connectivity, and a compact design suitable for small offices or home offices. Below are key sections covering setup, features, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Monochrome laser engine, Automatic Document Feeder (ADF), Control Panel with LCD, Paper Tray, Network Port, USB Port.

Unpacking and Setup

Unpack and inspect contents. Place on a stable, level surface near a power outlet.

1. Remove all tape and packing materials from inside and outside the machine.
2. Install the toner cartridge: Open front cover, remove cartridge from packaging, shake gently, and insert until it clicks.
3. Load paper: Adjust paper guides in tray, load up to 250 sheets of plain paper.
4. Connect power cord and turn on the machine using the power switch.

WARNING! Machine is heavy; lift with care using handles. Ensure proper ventilation around the device.

Installation and Configuration

Power on the machine; follow initial setup prompts on the LCD.

1. Connect to network: Use Ethernet cable to connect to router/switch.
2. Install drivers: Insert installation CD or download from Brother website, follow on-screen instructions.
3. Set date/time: Use control panel menu to configure system settings.
4. Configure fax settings: Enter line type, station ID, and other telephony parameters if using fax.

CAUTION! Use only Brother-approved toner and supplies. Avoid placing near heat sources or in direct sunlight.

Specifications

• Type: Monochrome Laser MFC (Print, Scan, Copy, Fax).
• Print Speed: Up to 30 ppm.
• First Print Out Time: Less than 10 seconds.
• Paper Sizes: Letter, Legal, Executive, A4, A5, B5, envelopes.
• Scanner Type: Flatbed + ADF, CIS, 600 x 600 dpi optical.
• Copy Speed: Up to 30 cpm (black & white).
• Fax Transmission Speed: Approx. 3 seconds per page.
• Memory: 64 MB.
• Power Consumption: Approx. 470W (printing), 65W (ready), 1.4W (sleep).
• Dimensions (W x D x H): 15.7" x 16.1" x 12.7".
• Weight: Approx. 24.7 lbs.

Control Panel and Settings

Access menus via LCD and navigation buttons. Control Panel: Power, Start, Stop/Exit, numeric keypad, navigation arrows, OK, Back, Copy, Scan, Fax, Menu.

LCD Menu Navigation: Use arrows to navigate, OK to select. Main menus: Printer, Fax, Scan, Copy, System Settings.

Printer Settings: Density, Toner Save, Paper Size, Duplex. Fax Settings: Station ID, Dial Mode, Redial, Fax Forward. Scan Settings: File Format (PDF, JPEG), Resolution, Destination. Copy Settings: Copies, Darkness, Reduce/Enlarge. System Settings: Network, Date/Time, Language, Reports, Reset.

Printing Functions

Supports printing from computer, mobile devices (via Brother iPrint&Scan), and network.

1. Ensure machine is on and connected to network or USB.
2. Select Brother MFC-L2710DN as printer in application's print dialog.
3. Configure print settings: Number of copies, duplex, paper size, quality.
4. Click Print; job appears in machine's queue.
5. For manual duplex: Follow prompts on LCD to reinsert paper.

Tip: Use Toner Save mode for draft documents to extend cartridge life.

Scanning and Copying

Scan to email, network folder, USB, or computer. Copy using flatbed or ADF.

1. Scanning: Place document on flatbed or in ADF. Press Scan button, select destination via LCD or computer software.
2. Copying: Place original, press Copy button, set number of copies and settings (darkness, size), press Start.
3. Reduce/Enlarge: Use % settings in copy menu (50% to 200%).
4. ID Copy: Copies both sides of an ID card onto a single page.

WARNING! Do not force documents into ADF; ensure no staples or clips.

Fax Functions

Send and receive faxes manually or automatically.

1. Sending: Place document, dial number using keypad or speed dial, press Start.
2. Receiving: Set to Auto mode for automatic reception, or Manual to answer manually.
3. Speed Dial: Store up to 100 numbers for quick dialing.
4. Fax Forward: Forward received faxes to another fax number.

Note: Ensure telephone line is connected to LINE port, not EXT port.

Maintenance and Care

Unplug before cleaning. Use dry, lint-free cloth; do not use alcohol or solvents.

1. Toner Replacement: Replace when toner low message appears. Open front cover, remove old cartridge, install new one.
2. Cleaning: Wipe exterior with damp cloth; clean scanner glass with glass cleaner and soft cloth.
3. Paper Jam Clearing: Follow guided instructions on LCD; open rear cover or ADF to remove jammed paper.
4. Drum Unit: Replace approximately every 12,000 pages (DR-2310).

CAUTION! Do not touch the green surface of the drum unit; keep toner away from skin and clothing.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential installation. ICES-003: Complies with Canadian EMI regulations. ENERGY STAR®: Qualified product. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Reset: Menu > System Settings > Reset > Reset All Settings (caution: erases all configurations).

Service: 1-877-276-8437; support.brother.com