Brother MFC-J4510DW Manual

The Brother MFC-J4510DW is a versatile All-in-One color inkjet printer featuring print, copy, scan, and fax capabilities. It supports wireless and wired network connectivity, automatic duplex printing, a 250-sheet paper capacity, and a 2.7-inch color touchscreen. Compatible with Windows and Mac, it offers mobile printing options and high-yield ink cartridges for cost efficiency. Below are key sections for setup, features, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Color touchscreen, automatic document feeder (ADF), paper trays, ink cartridges, control buttons, network ports, and USB interface.

Unpacking and Setup

Remove all packaging materials and inspect contents. Place on a flat, stable surface near a power outlet.

1. Install ink cartridges: Open front cover, remove protective tape from cartridges, insert into correct slots.
2. Load paper: Adjust paper guides in tray, load up to 250 sheets of plain paper.
3. Connect power: Plug power cord into printer and wall outlet, then turn on power switch.
4. Install print head: Printer will prompt to install print head; follow on-screen instructions.

WARNING! Do not touch print head nozzles or ink contacts. Keep printer level during setup.

First-Time Configuration

Power on printer; follow initial setup wizard on touchscreen.

1. Select language: Choose preferred language (default is English).
2. Align print head: Printer will automatically print and scan alignment page.
3. Set date/time: Enter current date and time for fax functions.
4. Connect to network: Choose wireless or wired connection method.
5. Install drivers: Download latest drivers from Brother website or use included CD.

CAUTION! Do not unplug printer during initial setup or print head alignment.

Specifications

• Print Resolution: Up to 1200 x 6000 dpi.
• Copy Resolution: Up to 1200 x 1200 dpi.
• Scan Resolution: Up to 1200 x 2400 dpi.
• Fax Transmission: Approx. 3 seconds per page.
• Memory: 128 MB RAM.
• Operating Systems: Windows 7/8/10/11, macOS 10.12 or later.
• Dimensions: 17.7" W x 16.1" D x 12.6" H.
• Weight: 24.7 lbs.
• Power Consumption: Approx. 30W (printing), 1.5W (standby).
• Warranty: 1-year limited warranty.

Control Panel and Settings

Access functions via 2.7-inch color touchscreen and physical buttons.

Touchscreen Menu: Home, Copy, Scan, Fax, Settings, Network, Reports.

Physical Buttons: Power, Home, Stop/Exit, Color Start, Black Start, # (for fax dialing).

Settings Menu: Network configuration, printer preferences, fax settings, maintenance functions, device information. Copy Settings: Number of copies, darkness, paper size, reduce/enlarge, 2-sided copying. Scan Settings: Scan destination (PC, USB, email), file format (PDF, JPEG), resolution, color mode. Fax Settings: Dial mode (tone/pulse), fax header, redial settings, error correction.

Connecting to Network

Wireless: Connect via WPS or manual setup. Wired: Use Ethernet cable to router.

1. Wireless setup: Press Network button on control panel, select Wireless LAN, choose connection method.
2. WPS method: Press WPS button on router within 2 minutes of printer prompt.
3. Manual setup: Select SSID from list, enter password using touchscreen keyboard.
4. Wired connection: Connect Ethernet cable to printer and router, wait for IP address assignment.

Tip: Print Network Configuration Report to verify connection and view IP address.

Printing and Copying

Supports various paper types and sizes up to 8.5" x 14" (legal).

1. Print from computer: Select Brother printer driver, adjust settings as needed.
2. Copy documents: Place original in ADF or on scanner glass, select copy settings on touchscreen.
3. Duplex printing/copying: Enable in print driver or copy settings menu.
4. Multiple copies: Use numeric keypad on touchscreen to specify quantity.
5. Photo printing: Use photo paper in rear tray, select appropriate paper type in driver.
6. Cancel job: Press Stop/Exit button during processing.
7. Check ink levels: View on touchscreen under Maintenance menu or print status report.

WARNING! Do not open covers or remove paper during printing. Allow prints to dry before handling.

Scanning and Faxing

Scan to PC, USB, email, or cloud services. Fax with speed dial and memory backup.

1. Scan to computer: Install Brother software, select scan destination, choose settings.
2. Scan to USB: Insert USB flash drive, select Scan to USB on touchscreen.
3. Send fax: Load document, enter fax number using keypad, press Color or Black Start.
4. Receive fax: Set to auto-answer mode or manually answer incoming calls.
5. Fax memory: Stores up to 300 pages if paper runs out or printer is off.

Note: For scanning to email, SMTP server configuration may be required.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and print quality.

1. Clean print head: Access via touchscreen (Maintenance > Clean Print Head).
2. Clean scanner glass: Use soft, lint-free cloth slightly dampened with water.
3. Replace ink cartridges: When low ink warning appears, replace individual colors as needed.
4. Clean exterior: Unplug printer, wipe with dry cloth. Do not use alcohol or solvents.
5. Update firmware: Check Brother website periodically for updates.

CAUTION! Always turn off and unplug printer before cleaning. Use only recommended supplies.

Regulatory Information

FCC Part 15: Class B digital device compliant. Energy Star qualified. RoHS compliant. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437. This product may be protected by one or more U.S. and foreign patents.

Troubleshooting

Reset: Settings > General Settings > Reset > Reset All Settings (note: this clears network settings).

Service: 1-877-276-8437; support.brother.com