Brother HL-L2310D Manual

The Brother HL-L2310D is a monochrome laser printer offering fast printing speeds up to 30 pages per minute, automatic duplex printing, a 250-sheet paper capacity, USB 2.0 and Ethernet connectivity, energy-saving features, and compatibility with various operating systems. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Printing Operations 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Printer unit, Toner cartridge, Power cord, USB cable, Setup CD-ROM, User manual.

Feature	Description
Print Speed	Up to 30 pages per minute
Duplex Printing	Automatic two-sided printing
Paper Capacity	250-sheet input tray
Connectivity	USB 2.0, Ethernet (RJ-45)
Resolution	Up to 2400 x 600 dpi
Duty Cycle	Up to 10,000 pages per month
Control Panel	LED indicators and buttons
Energy Saving	Auto power on/off, low power consumption
Compatibility	Windows, macOS, Linux
Toner Save Mode	Reduces toner consumption

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

Remove packaging materials and tapes from printer.
Install toner cartridge: Open front cover, remove cartridge from packaging, shake gently, insert until it clicks.
Load paper: Adjust paper guides in input tray, load up to 250 sheets of plain paper.
Connect power cord to printer and wall outlet.

WARNING! Do not touch the green drum surface of the toner cartridge. Avoid exposure to direct sunlight or high humidity.

First-Time Setup

Power on printer; follow on-screen prompts from computer.

Install software: Insert setup CD or download drivers from Brother website.
Connect to computer: Use USB cable or connect to network via Ethernet.
Configure printer settings: Use control panel or software utility to set language, paper size, etc.
Print test page: Verify installation and print quality.

CAUTION! Ensure printer is on a stable surface with adequate ventilation.

Specifications

Print Technology: Monochrome laser.
Print Speed: Up to 30 ppm.
First Print Out Time: Less than 10 seconds.
Paper Sizes: Letter, Legal, Executive, A4, A5, B5, envelopes.
Memory: 32 MB standard.
Noise Level: Less than 53 dB during operation.
Power Consumption: Approx. 370W printing, 45W ready, 1.5W sleep.
Dimensions: 14.2" x 14.2" x 9.8".
Weight: Approx. 18.7 lbs.

Controls and Settings

Control Panel: POWER button, ERROR and DATA LEDs, TONER/DRUM LED.

Software Utility: Access via computer to configure print settings, network setup, maintenance.

Print Settings: Paper size, orientation, duplex, toner save mode, resolution. Network: IP address configuration via control panel or software. Maintenance: Print head cleaning, firmware updates, reset functions.

Connecting Devices

USB: Direct connection to computer. Ethernet: Network connection for multiple users.

Turn off printer before connecting cables.
Connect USB cable to computer and printer, or Ethernet cable to router and printer.
Power on printer and install drivers as prompted.
Select printer in computer's print dialog.

Tip: For network setup, use the installer software to automatically detect and configure the printer.

Printing Operations

Supports standard printing, duplex printing, multiple pages per sheet, watermark, poster printing.

Send print job: Select Brother HL-L2310D as printer in application.
Adjust settings: Choose paper size, duplex, quality in print dialog.
Monitor status: Check DATA LED on control panel.
Cancel print job: Press and hold POWER button for 2 seconds if needed.
Use toner save mode: Enable in printer properties to extend toner life.
Print reports: Configuration page, network settings via control panel.

WARNING! Do not open covers during printing. Allow printer to cool before maintenance.

Maintenance Features

Toner Replacement: Replace when TONER LED flashes or print quality fades. Drum Unit Replacement: Replace approximately every 12,000 pages (DRUM LED indicates). Firmware Updates: Download from Brother support site.

Care & Cleaning

Unplug before cleaning. Exterior: Use soft, dry cloth. Interior: Use lint-free cloth to remove paper dust; avoid touching electrical components.

CAUTION! Do not use alcohol, solvents, or abrasive cleaners. Keep printer away from dust and liquids.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star certified. Copyright © 2025 Brother Industries, Ltd.; trademarks owned by Brother. For support, visit support.brother.com or contact 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not powering on	Power connection	Check power cord connections; ensure outlet is functional.
Poor print quality	Toner/low cartridge	Replace toner cartridge; run cleaning cycle from software.
Paper jams	Paper misloaded/damaged	Open covers, remove jammed paper carefully; reload paper correctly.
Not printing from computer	Driver/connection	Reinstall drivers; check USB/Ethernet cable; ensure printer is selected.
Network connection issues	IP configuration	Print network configuration page; verify IP settings; restart router/printer.

Reset: Unplug for 60 seconds to reset; restore network defaults via control panel if needed.

Service: 1-877-276-8437; support.brother.com