Brother HL-J6010DW Manual

The Brother HL-J6010DW is a monochrome laser printer designed for high-volume office use, featuring fast printing speeds, automatic duplex printing, wireless connectivity, and robust paper handling. It supports various paper sizes and types, offers secure printing options, and includes energy-saving features. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Network 7. Printing Operations 8. Maintenance & Supplies 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with LCD display, paper trays, toner cartridge, network interfaces, USB port.

Feature	Description
Print Speed	Up to 40 pages per minute (monochrome)
Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Automatic two-sided printing
Paper Capacity	Standard 500 sheets, expandable
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Mobile Printing	Apple AirPrint, Google Cloud Print, Brother iPrint&Scan
Control Panel	LCD display, navigation buttons, power button
Toner Save Mode	Reduces toner consumption
Secure Print	Requires PIN for confidential documents
Energy Star Certified	Energy-efficient operation

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

Remove packaging materials: Take out all tapes and protective covers.
Install toner cartridge: Open front cover, insert cartridge, close cover.
Load paper: Adjust paper guides in tray, load paper stack.
Connect power: Plug power cord into printer and wall outlet.
Connect to computer: Use USB cable or set up network connection.

WARNING! Printer is heavy; lift with care using handles. Ensure adequate ventilation around printer.

First-Time Setup

Power on printer; follow on-screen prompts on control panel.

Initial startup: Printer will perform self-test and calibration.
Set language: Use control panel to select preferred language.
Install drivers: Use installation CD or download from Brother website.
Configure network: Use control panel menu for Wi-Fi or Ethernet setup.
Test print: Print configuration page to verify operation.

CAUTION! Do not touch the green drum surface of toner cartridge. Keep printer away from direct sunlight.

Specifications

Print Technology: Monochrome laser
Print Speed: Up to 40 ppm
First Print Out: Less than 8 seconds
Monthly Duty Cycle: Up to 75,000 pages
Memory: 512MB standard
Paper Sizes: Letter, Legal, Executive, A4, A5, B5, envelopes
Paper Weight: 16-43 lb (60-163 gsm)
Interfaces: USB 2.0, Ethernet 10/100/1000BASE-T, Wi-Fi 802.11b/g/n
Power Consumption: 550W printing, 65W ready, 1.5W sleep
Dimensions: 16.1" W x 16.3" D x 12.2" H
Weight: 39.7 lb

Controls and Settings

Access menus via control panel buttons and LCD display.

Control Panel: Power button, LCD display, navigation arrows, OK, Back, Home, Cancel, Go (status monitor).

Print Settings: Quality (600 dpi, 1200 dpi), toner save, duplex, paper type, orientation. Network: Wi-Fi setup, IP address configuration, wireless direct. Maintenance: Print reports, clean drum, reset counters. Security: Admin password, secure print, network authentication.

Connecting to Network

Ethernet: Connect cable to router. Wi-Fi: Use control panel or WPS.

Turn on printer and ensure network is available.
For Ethernet: Connect cable to printer and router.
For Wi-Fi: Navigate to Network > Wireless > Setup Wizard.
Select network name and enter password.
Confirm connection by printing network configuration report.

Tip: For best performance, place printer within range of wireless router.

Printing Operations

Supports various document types and printing methods.

Standard printing: Select print from application, choose printer settings.
Duplex printing: Enable in print dialog or printer properties.
Secure printing: Select "Secure Print" in driver, enter PIN at printer.
Mobile printing: Use Brother iPrint&Scan app or built-in mobile solutions.
Multiple copies: Specify quantity in print dialog.
Paper selection: Choose tray and paper type in printer properties.
Cancel print job: Press Cancel button on control panel.

WARNING! Do not open covers during printing. Allow printer to cool before maintenance.

Maintenance & Supplies

Toner Replacement: Replace when indicator lights or message appears.

Open front cover.
Remove old toner cartridge.
Unpack new cartridge, shake gently.
Insert new cartridge until it clicks.
Close front cover.

Cleaning: Use dry, lint-free cloth for exterior. Use approved cleaning cloth for interior when needed.

CAUTION! Use only Brother genuine toner cartridges. Do not expose toner to light for extended periods.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star qualified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not powering on	Power connection	Check power cord connections; ensure outlet is working.
Poor print quality	Toner/low settings	Replace toner cartridge; run cleaning cycle; adjust print density.
Paper jams	Paper loading/obstruction	Open covers, remove jammed paper carefully; reload paper properly.
Not connecting to network	Settings/cables	Check network cables; verify Wi-Fi password; restart router and printer.
Driver not installed	Software	Download latest driver from Brother website; run installation again.

Reset: Network reset available in menu > Network > Reset.

Service: 1-877-276-8437; support.brother.com