Brother DCP-L2510D Manual

The Brother DCP-L2510D is a monochrome laser all-in-one printer featuring printing, copying, and scanning capabilities. It offers fast printing speeds up to 30ppm, automatic duplex printing, a 250-sheet paper capacity, USB connectivity, energy-saving modes, and user-replaceable toner cartridges. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Monochrome laser engine, Automatic Document Feeder (ADF), Control Panel, Paper trays, USB port, Toner cartridge compartment.

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

1. Remove all packaging materials and tapes from inside and outside the printer.
2. Install the toner cartridge: Open front cover, remove cartridge from packaging, shake gently, insert until it clicks.
3. Load paper: Adjust paper guides in tray, load up to 250 sheets of plain paper.
4. Connect power cable to printer and wall outlet.
5. Connect USB cable to computer (if setting up immediately).

WARNING! Do not touch the green drum surface of the toner cartridge. Avoid placing printer in dusty or humid locations.

First-Time Setup

Power on printer; follow on-screen prompts on computer if installing drivers.

1. Install software: Insert included CD or download drivers from Brother website.
2. Follow installation wizard to install printer drivers and utilities.
3. Configure basic settings: Use control panel to set language, date/time.
4. Print test page: Verify installation and print quality.
5. Register product online for support and updates.

CAUTION! Ensure firmware is updated for optimal performance and security.

Specifications

• Print Technology: Monochrome laser.
• Print Resolution: Up to 2400 x 600 dpi.
• First Print Out Time: Less than 10 seconds.
• Recommended Monthly Duty Cycle: Up to 10,000 pages.
• Scan Resolution: Up to 600 x 600 dpi (optical).
• Copy Resolution: Up to 600 x 600 dpi.
• Copy Speed: Up to 30 cpm (black & white).
• Power Consumption: Approx. 370W (printing), 1.5W (sleep).
• Operating Environment: Temperature 50-90°F, Humidity 20-80% RH.
• Weight: Approx. 22.5 lbs.

Controls and Settings

Access functions via Control Panel buttons and LCD display.

Control Panel: Power button, LCD (2-line), Navigation arrows, OK, Back, Copy, Scan, Menu, Eco (energy saver), Cancel, Start/Stop.

Menu Settings: Language, Paper Size, Report Print, Network Config (if applicable), Default Settings, Maintenance. Copy Settings: Number of copies, Darkness, Reduce/Enlarge, Duplex, Paper Source. Scan Settings: Scan To (File, Email, OCR), Resolution, File Format (PDF, JPEG).

Connecting to Computer

USB: Direct connection via USB cable. Network: Optional wired network interface available.

1. Ensure printer is off before connecting USB cable.
2. Connect USB cable to printer and computer.
3. Power on printer; computer should detect new hardware.
4. Install drivers if prompted or run installation software.
5. Select Brother DCP-L2510D as default printer in computer settings.

Tip: For best performance, use the USB cable provided or a certified high-quality cable.

Printing and Copying

Supports standard paper sizes (Letter, Legal, A4).

1. Printing: Select document, choose Print, select DCP-L2510D, adjust settings (duplex, quality), click Print.
2. Copying: Place original in ADF or on glass, use control panel to set copies, darkness, size, press Start.
3. Duplex: Enable in print dialog or copy settings for automatic two-sided output.
4. Multiple Copies: Enter number (1-99) on control panel or computer.
5. Cancel Job: Press Cancel button on printer or stop print job on computer.

WARNING! Do not open covers during printing. Allow printed pages to cool before handling.

Scanning Documents

Scan to computer via USB or network (if equipped).

1. Place document in ADF or face down on scanner glass.
2. On computer, open Brother software (ControlCenter) or use Menu on printer.
3. Select scan destination (File, Email, OCR), adjust settings (resolution, format).
4. Press Start on printer or click Scan in software.
5. Retrieve scanned file from designated folder.

Note: For double-sided originals, use ADF with duplex scanning feature if supported.

Maintenance & Care

Unplug before cleaning. Use dry, lint-free cloth; vacuum paper dust from interior periodically.

1. Toner Replacement: When toner low message appears, replace with Brother TN-241 cartridge.
2. Cleaning Exterior: Wipe with damp cloth; avoid cleaners on control panel.
3. Cleaning Interior: Open front cover, gently wipe paper path with dry cloth.
4. Firmware Updates: Check Brother website periodically for updates.

CAUTION! Do not use alcohol or abrasive cleaners. Keep toner cartridges in sealed bag until use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star certified for energy efficiency. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Reset: Menu > Initial Setup > Reset > All Settings (if needed).

Service: 1-877-276-8437; support.brother.com