Brother DCP-9015CDW Manual

The Brother DCP-9015CDW is a color laser all-in-one printer featuring print, copy, scan, and fax capabilities. It offers wireless and network connectivity, automatic duplex printing, a flatbed scanner, and support for various media sizes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Printing and Copying 8. Scanning and Faxing 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Color laser engine, flatbed scanner, automatic document feeder (ADF), control panel, paper trays, and connectivity ports.

Feature	Description
Print Speed	Up to 23 pages per minute (black & color)
Resolution	Up to 2400 x 600 dpi
Connectivity	Wireless, Ethernet, USB 2.0
Duplex Printing	Automatic two-sided printing
Paper Capacity	250-sheet input tray
Scanner Type	Flatbed + ADF (50 sheets)
Fax	Super G3, 33.6 kbps modem
Display	2-line LCD with navigation buttons
Supported Media	Plain, cardstock, envelopes, labels
Toners	Separate CMYK cartridges

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet and network access.

Remove packaging materials and tape from inside and outside the printer.
Install toner cartridges: Open front cover, remove protective tape from cartridges, insert into correct slots (Black, Cyan, Magenta, Yellow).
Load paper: Adjust paper guides in tray, load plain paper.
Connect power cord to printer and wall outlet.

WARNING! Do not touch the green drum surface of toner cartridges. Keep printer away from heat and humidity.

First-Time Setup

Power on printer; follow on-screen prompts on control panel.

Initial startup: Printer will calibrate and display language selection.
Set language: Use arrow keys to select ENGLISH (default), press OK.
Connect to network: Use wireless setup wizard or connect Ethernet cable.
Install software: Insert driver CD or download from Brother website, follow installation prompts.
Print test page: Verify installation and print quality.

CAUTION! Ensure proper ventilation; do not block vents.

Specifications

Type: Color Laser All-in-One (Print, Copy, Scan, Fax).
Print Technology: Laser electrophotography.
Print Speed: Up to 23 ppm (black & color).
First Print Out Time: Less than 12 seconds.
Memory: 64 MB standard.
Paper Sizes: Letter, Legal, Executive, A4, A5, envelopes.
Scanner Resolution: Up to 1200 x 1200 dpi.
Fax Transmission Speed: Approx. 3 seconds per page.
Power Consumption: Approx. 470W (printing), 65W (ready), 2W (sleep).
Operating Environment: 50-90.5°F, 20-80% humidity.

Controls and Settings

Access menus via control panel buttons and LCD display. Front Panel: POWER, STOP/EXIT, UP/DOWN arrows, OK, MENU, COPY, SCAN, FAX.

Menu Navigation: Use MENU button to access settings: Network, Fax, System, Maintenance. Print Settings: Quality (Draft, Normal, Fine), Duplex, Toner Save mode. Copy Settings: Copies, Darkness, Reduce/Enlarge. Scan Settings: Resolution, File Format (PDF, JPEG), Destination. Fax Settings: Dial mode, Redial, Fax Forward.

Connecting Devices

Wireless: Use WPS or manual setup. Wired: Ethernet to router. Direct: USB to computer.

Turn on printer and ensure network/router is active.
Wireless: Press MENU > Network > Wireless > Setup Wizard, follow prompts.
Wired: Connect Ethernet cable to printer and router.
USB: Connect USB cable to computer, install drivers when prompted.
Verify connection: Print network configuration page from menu.

Tip: For stable wireless, place printer within range of router.

Printing and Copying

Supports various document types and media.

Print from computer: Select Brother printer in application, adjust properties as needed.
Copy: Place original on scanner glass or in ADF, press COPY, set copies/darkness, press START.
Duplex printing: Enable in print driver or via control panel (MENU > Print Settings > Duplex).
Multiple copies: Use numeric keypad on control panel or software.
Enlarge/Reduce: Use % settings in copy menu (50-200%).
Toner Save: Enable in print driver or MENU > Print Settings > Toner Save.

WARNING! Do not touch the fuser unit inside printer; it is hot during and after operation.

Scanning and Faxing

Scan to computer, email, or network folder. Send/receive faxes.

Scanning: Place document, press SCAN, select destination (PC, Email, Network), adjust settings, press START. Faxing: Load document, dial number using keypad, press START. Receive fax automatically or manually. Program speed dials for frequent numbers.

Care & Maintenance

Unplug before cleaning. Exterior: Use dry, soft cloth. Interior: Use lint-free cloth to remove paper dust. Replace toner when low message appears. Clean scanner glass with glass cleaner and soft cloth.

CAUTION! Do not use alcohol or abrasive cleaners. Keep toner cartridges in sealed bag until installation.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ENERGY STAR® qualified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not responding	Connection/power	Check cables; restart printer and computer; verify network settings.
Poor print quality	Toner/paper	Replace low toner; use recommended paper; clean drum units.
Paper jams	Paper path	Open covers, remove jammed paper carefully; reload paper correctly.
Scanner not working	Driver/connection	Reinstall scanner driver; check USB/network connection.
Fax transmission fails	Line/numbers	Check phone line connection; verify recipient number; try redial.

Reset: MENU > System > Reset to restore factory defaults if needed.

Service: 1-877-276-8437; support.brother.com