Brother DCP-9010CN Manual

The Brother DCP-9010CN is a color laser all-in-one printer featuring print, copy, and scan functions. It offers high-speed printing, automatic duplex printing, network connectivity (wired and wireless), USB 2.0 interface, and support for various paper sizes and types. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Color laser engine, Automatic Document Feeder (ADF), Control Panel with LCD, Paper trays, USB port, Ethernet port, Wireless adapter.

Feature	Description
Print Speed	Up to 20 pages per minute (black & color)
Print Resolution	Up to 2400 x 600 dpi
Automatic Duplex Printing	Two-sided printing standard
Paper Capacity	250-sheet input tray, 50-sheet ADF
Connectivity	USB 2.0, Ethernet, Wireless 802.11b/g/n
Copy Features	Reduce/Enlarge, ID Copy, N-up copying
Scan Features	Scan to email, file, OCR, network folder
Toner Cartridges	Separate CMYK cartridges
Control Panel	2-line LCD display, navigation buttons
Compatibility	Windows, macOS, Linux

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

1. Remove all packaging materials and tape from inside and outside the printer.
2. Install toner cartridges: Open front cover, remove protective tape from cartridges, insert in correct color slots (C, M, Y, K).
3. Load paper: Adjust paper guides in input tray, load plain paper.
4. Connect power cable to printer and wall outlet.
5. Connect to computer via USB cable or set up network connection.

WARNING! Toner cartridges are sensitive to light; keep them in original packaging until installation. Avoid touching the green drum surface.

First-Time Setup

Power on printer; follow on-screen prompts on computer.

1. Install drivers: Insert installation CD or download from Brother website, follow wizard.
2. Network setup: For wireless, use WPS button or manual configuration via control panel.
3. Test print: Print configuration report to verify installation.
4. Register product: Online registration for support and updates.

CAUTION! Ensure printer is on a stable surface with adequate ventilation. Keep away from heat sources and direct sunlight.

Specifications

• Printer Type: Color laser all-in-one (Print, Copy, Scan).
• Print Speed: Up to 20 ppm (black and color).
• First Print Out Time: Less than 15 seconds.
• Paper Sizes: Letter, Legal, A4, Executive, envelopes, labels, transparencies.
• Paper Weight: 16-43 lb (60-163 gsm).
• Scanner Type: Flatbed + ADF, color CIS.
• Scan Resolution: Up to 1200 x 2400 dpi.
• Copy Resolution: Up to 600 x 600 dpi.
• Interface: USB 2.0 Hi-Speed, 10/100 Base-TX Ethernet, Wireless LAN.
• Power Consumption: Approx. 470W (printing), 65W (ready), 2W (sleep).
• Operating Environment: Temperature 50-90°F (10-32°C), Humidity 20-80% RH.

Controls and Settings

Access functions via Control Panel LCD and buttons.

Control Panel: POWER, MENU, UP/DOWN arrows, OK, BACK, COPY, SCAN, ECO (toner save), WIRELESS (if equipped), CANCEL/JOB RESET.

Menu Settings: Network (TCP/IP, wireless settings), Printer (paper size, density, timeout), Copy (default settings, zoom), Scan (default destination, format), Maintenance (clean drum, print reports), Reset (restore defaults).

LCD Messages: Display status, errors, toner levels, paper jams.

Connecting to Network

Wired: Connect Ethernet cable to router and printer. Wireless: Use WPS or manual setup.

1. Wired: Connect cable, printer auto-detects network settings.
2. Wireless (WPS): Press WPS button on router, then press WIRELESS button on printer until light flashes.
3. Wireless (Manual): Use control panel to select SSID and enter password.
4. Verify connection: Print network configuration report.

Tip: For best wireless performance, place printer within range of router without obstructions.

Printing and Copying

Supports various document types and copy functions.

1. Printing: Select printer in application, adjust properties (duplex, color, quality).
2. Copying: Place original on glass or in ADF, press COPY, set number of copies, density, zoom, press START.
3. Special Copy Modes: ID Copy (both sides of ID on one page), N-up (multiple pages on one sheet), Poster (enlarge across multiple pages).
4. Toner Save: Press ECO button to reduce toner usage for draft documents.

WARNING! Do not touch the fuser unit inside printer; it gets hot during operation. Allow to cool before clearing paper jams near fuser.

Scanning Features

Scan to computer, email, network folder, or USB drive (if supported).

1. Place document on glass or in ADF.
2. Press SCAN button, select destination (Scan to PC, Email, Network).
3. Adjust settings: Resolution, color mode, file format (PDF, JPEG, etc.).
4. Press START to scan.
5. For PC scanning, ensure Brother software is installed and PC is on same network.

OCR (Optical Character Recognition) available with included software.

Maintenance & Care

Unplug before cleaning exterior. Use dry, lint-free cloth. Clean interior as needed.

1. Cleaning: Wipe exterior with damp cloth (not wet). Clean scanner glass with soft cloth and glass cleaner.
2. Toner Replacement: Replace when LCD indicates low or empty. Use genuine Brother TN-210 series cartridges.
3. Drum Unit: Replace DR-210 drum unit after approx. 12,000 pages.
4. Paper Jam Clearing: Follow guide in manual; open rear cover, duplex unit, or paper trays to remove jammed paper gently.

CAUTION! Do not use alcohol or abrasive cleaners. Do not touch transfer belt or drum with fingers.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star® qualified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not printing	Connection, driver, paper jam	Check cable/network; reinstall driver; clear paper jam.
Poor print quality	Toner low, drum dirty, media	Replace toner; clean drum unit; use recommended paper.
Paper jams frequently	Paper type, loaded incorrectly, worn parts	Use correct paper; reload properly; check for obstructions.
Scanner not working	Software, connection	Reinstall scanner driver; ensure USB/network connection.
Wireless connection lost	Router, distance, interference	Restart router/printer; move closer; check for interference.
Error messages on LCD	Various internal errors	Note error code; refer to manual; power cycle printer.

Reset: Menu > Maintenance > Reset Settings to restore defaults.

Service: 1-877-276-8437; support.brother.com