Brother DCP-8110DN Manual

The Brother DCP-8110DN is a monochrome laser All-in-One printer featuring print, copy, and scan functions with network connectivity. It offers high-speed printing up to 30ppm, automatic duplex printing, a 250-sheet paper tray, USB and Ethernet ports, and advanced toner-saving modes. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Paper Tray, Scanner Unit, Toner Cartridge, USB Port, Ethernet Port, Power Switch.

Feature	Description
Print Speed	Up to 30 pages per minute
Duplex Printing	Automatic two-sided printing
Paper Capacity	250-sheet input tray
Connectivity	USB 2.0, 10/100 Base-TX Ethernet
Resolution	Up to 1200 x 1200 dpi
Copy Features	Reduce/Enlarge, ID Copy, N-Up copying
Scan Features	Scan to Email, File, OCR
Toner Save Mode	Reduces toner consumption
Control Panel	LCD display, navigation buttons
Compatibility	Windows, macOS, Linux

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

1. Remove packaging materials: Take out all tapes and protective covers.
2. Install toner cartridge: Open front cover, insert cartridge until it clicks.
3. Load paper: Adjust paper guides in tray, load up to 250 sheets.
4. Connect power: Plug power cord into printer and wall outlet.
5. Connect to computer: Use USB cable or connect to network via Ethernet.

WARNING! Do not touch the green drum surface of the toner cartridge. Keep printer away from heat sources and moisture.

First-Time Setup

Power on printer; follow setup wizard on computer.

1. Install software: Insert CD or download drivers from Brother website.
2. Configure network: Use control panel or BRAdmin software to set IP address.
3. Test print: Print configuration page to verify installation.
4. Set default preferences: Configure paper size, print quality, duplex settings.

CAUTION! Ensure firmware is updated for optimal performance and security.

Specifications

• Print Technology: Monochrome laser.
• Print Speed: Up to 30 ppm.
• First Print Out: Less than 10 seconds.
• Resolution: 1200 x 1200 dpi.
• Paper Sizes: Letter, Legal, Executive, A4, A5, B5.
• Paper Capacity: 250 sheets.
• Scanner Type: Flatbed, CIS.
• Scan Resolution: Up to 1200 x 1200 dpi.
• Copy Resolution: 600 x 600 dpi.
• Power Consumption: Approx. 470W (printing), 65W (ready), 2W (sleep).
• Operating Environment: Temperature 50-90.5°F, Humidity 20-80% RH.

Controls and Settings

Access menus via control panel LCD. Buttons: POWER, COPY, SCAN, MENU, UP/DOWN arrows, OK, BACK, STOP/EXIT.

Menu Options: System Settings, Network Settings, Print Reports, Maintenance.

Print Settings: Toner Save, Duplex, Paper Size, Print Quality. Copy Settings: Darkness, Reduce/Enlarge, ID Copy, N-Up. Scan Settings: Resolution, File Format, Destination. Network: TCP/IP, WSD, Bonjour.

Connecting to Network

Ethernet: Connect cable to router/switch. Configure via control panel or software.

1. Connect Ethernet cable to printer and network router.
2. Obtain IP automatically (DHCP) or set manually.
3. Print network configuration report to verify settings.
4. Install network drivers on computers.

Tip: Use BRAdmin Light utility for easy network discovery and configuration.

Printing & Copying

Supports standard and advanced printing/copying features.

1. Printing: Select printer in application, set preferences, click Print.
2. Copying: Place original on scanner glass or in ADF, set options on control panel, press Start.
3. Duplex Printing: Enable in printer properties or via control panel.
4. Multiple Copies: Use numeric keypad on control panel for copy count.
5. Reduce/Enlarge: Select percentage or preset sizes (50% to 200%).
6. ID Copy: Copy both sides of an ID card onto single page.

WARNING! Do not touch scanner glass with fingers; use clean, smooth originals.

Scanning Features

Scan to Email, File, OCR, Network Folder.

1. Place document face down on scanner glass.
2. Press SCAN button on control panel.
3. Select destination (Email, File, etc.) using arrows and OK.
4. Adjust settings (resolution, format) if needed.
5. Press Start to scan.

Supported formats: PDF, JPEG, TIFF, BMP. OCR requires additional software.

Maintenance & Supplies

Replace toner when indicator lights or message appears. Use genuine Brother TN-660 toner cartridge.

1. Open front cover.
2. Remove old cartridge, dispose properly.
3. Unpack new cartridge, shake gently.
4. Insert until it clicks, close cover.

Cleaning: Turn off and unplug. Wipe exterior with dry cloth. Clean scanner glass with soft, lint-free cloth.

CAUTION! Do not use alcohol or abrasive cleaners. Do not expose toner cartridge to light for extended periods.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star® qualified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not printing	Connection/queue	Check cables/network; clear print queue; restart printer.
Poor print quality	Toner/paper	Replace toner cartridge; use recommended paper; clean inside.
Paper jams	Paper path	Open covers, remove jammed paper carefully; reload paper.
Scanner not working	Driver/connection	Reinstall scanner driver; check USB/network connection.
Network issues	Settings/cable	Print config report; verify IP settings; reseat Ethernet cable.

Reset: Menu > Initial Setup > Reset Settings if needed.

Service: 1-877-276-8437; support.brother.com