Brother DCP-8080DN Manual

The Brother DCP-8080DN is a monochrome laser All-in-One printer featuring print, copy, and scan functions. It offers high-speed printing up to 33ppm, automatic duplex printing, network connectivity (Ethernet), a 250-sheet paper tray, and advanced paper handling options. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel with LCD, Paper Tray, Scanner Unit, Toner Cartridge, Network Port, USB Port.

Feature	Description
Print Speed	Up to 33 pages per minute (A4)
Duplex Printing	Automatic two-sided printing
Paper Capacity	250-sheet standard tray
Connectivity	Ethernet (10/100/1000BASE-T), USB 2.0
Copy Functions	Reduce/Enlarge, ID Copy, N-up copying
Scan Resolution	Up to 1200 x 1200 dpi (optical)
Control Panel	2-line LCD display, navigation buttons
Toner Save Mode	Reduces toner consumption
Compatibility	Windows, macOS, Linux
Warranty	1-year limited warranty

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

1. Remove all packaging materials and tapes from inside and outside the printer.
2. Install the toner cartridge: Open front cover, remove protective tape from cartridge, insert until it clicks.
3. Load paper: Pull out paper tray, adjust guides, load up to 250 sheets of A4 paper.
4. Connect power cable to printer and wall outlet.
5. Connect network cable (Ethernet) or USB cable to computer if needed.

WARNING! Do not touch the green drum surface of the toner cartridge. Avoid placing printer in humid or dusty locations.

First-Time Setup

Power on printer; follow on-screen prompts on control panel.

1. Initial startup: Printer will perform self-test and calibrate.
2. Set language: Use Menu button on control panel to select language.
3. Configure network: For Ethernet, connect cable and printer will obtain IP automatically (or set manually via menu).
4. Install drivers: Insert installation CD or download latest drivers from Brother website.
5. Test print: Print configuration page to verify installation.

CAUTION! Ensure proper ventilation; keep area around printer clear.

Specifications

• Print Technology: Monochrome laser.
• Print Speed: Up to 33 ppm.
• Resolution: Up to 1200 x 1200 dpi.
• First Print Out Time: Less than 10 seconds.
• Paper Sizes: A4, Letter, Legal, Executive, envelopes, labels.
• Paper Capacity: 250 sheets (standard), optional tray available.
• Scanner Type:Flatbed, CIS
• Copy Speed: Up to 33 cpm (single-sided).
• Interface: Ethernet, USB 2.0.
• Power Consumption: Approx. 470W (printing), 65W (ready), 2W (sleep).
• Dimensions (W x D x H): 398 x 453.5 x 347.5 mm.
• Weight: Approx. 15.5 kg.

Controls and Settings

Access functions via control panel buttons and LCD menu.

Control Panel: Power, Stop/Exit, Menu, Left/Right arrows, OK, Copy, Scan.

Menu Settings: Report (print configuration, network settings), Machine Setup (language, sleep timer, reset), Network (TCP/IP, WSD), Default Settings (paper size, density, toner save).

Copy Settings: Number of copies, density, reduce/enlarge, duplex, N-up. Scan Settings: Resolution, file format (PDF, JPEG), destination (email, folder).

Connecting to Network

Ethernet connection for shared printing.

1. Connect Ethernet cable from router/switch to printer's network port.
2. Power on printer; it will obtain IP address via DHCP (default).
3. Print Network Configuration Report to verify IP address.
4. Install drivers on computers, select network connection during setup.

Tip: For static IP, configure via control panel: Menu > Network > TCP/IP > Manual.

Printing & Copying

Supports various print and copy functions.

1. Printing: Send print job from computer; ensure printer is selected.
2. Copying: Place original on scanner glass or in ADF (if equipped), press Copy, set options, press Start.
3. Duplex: Select 2-sided copy/print in settings.
4. Multiple copies: Use numeric keypad on control panel (or software) to set quantity.
5. Reduce/Enlarge: Select percentage (50% to 200%) or preset sizes.
6. ID Copy: Copies both sides of ID card onto single page.
7. Toner Save: Enable in menu or print driver to reduce toner usage.

WARNING! Do not touch scanner glass with fingers; use clean cloth. Avoid paper clips or staples in paper path.

Scanning Features

Scan to computer, email, or network folder.

1. Place document face down on scanner glass.
2. Press Scan button on control panel.
3. Select destination (Scan to PC, Scan to Email, Scan to Folder).
4. Adjust settings (resolution, format) via menu or software.
5. Press Start to begin scanning.

Supported formats: PDF, JPEG, TIFF. Resolution: 150 to 1200 dpi.

Maintenance & Supplies

Replace toner cartridge when low or empty.

1. Open front cover.
2. Remove old toner cartridge by pulling toward you.
3. Unpack new cartridge, shake gently, remove protective tape.
4. Insert new cartridge until it clicks securely.
5. Close front cover; printer will calibrate.

Cleaning: Unplug before cleaning. Wipe exterior with dry cloth. Clean scanner glass with soft, lint-free cloth lightly dampened with water.

CAUTION! Use only Brother Genuine toner cartridges. Do not refill or remanufacture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star® qualified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not powering on	Power cable/outlet	Ensure cable securely connected; try different outlet.
Poor print quality	Toner low/drum dirty	Replace toner cartridge; clean corona wire inside cartridge area.
Paper jams	Paper misloaded/damaged	Open covers, remove jammed paper carefully; reload paper correctly.
Not printing from computer	Driver/connection	Verify printer is selected; reinstall driver; check network/USB connection.
Scanner not working	Software/connection	Install scanning software; ensure USB/Ethernet connection is active.

Reset: Menu > Machine Setup > Reset Settings if available.

Service: 1-877-276-8437; support.brother.com