Brother DCP-8070D Manual

The Brother DCP-8070D is a monochrome laser All-in-One printer featuring print, copy, and scan functions. It offers high-speed printing up to 30ppm, automatic duplex printing, a 250-sheet paper capacity, PC-FAX capability (when connected to a computer with fax software), and network connectivity options. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit, Toner cartridge, Paper trays, Control panel, USB/Network ports.

Feature	Description
Print Speed	Up to 30 pages per minute
Automatic Duplex	Two-sided printing without manual flipping
Paper Capacity	250 sheets (standard)
Resolution	Up to 1200 x 1200 dpi
Copy Features	Reduce/Enlarge, ID Copy, N-Up copying
Scan Resolution	Up to 1200 x 1200 dpi (optical)
Connectivity	USB 2.0, Ethernet (Network model)
PC-FAX	Send/receive faxes via computer (software required)
Control Panel	LCD display, navigation buttons, Start/Stop
Toner Save Mode	Reduces toner consumption for draft prints

Installation

Unpack and inspect contents. Place on a stable, level surface near a power outlet.

1. Remove all packaging tape and protective materials from inside and outside the unit.
2. Install the toner cartridge: Open front cover, remove cartridge from packaging, shake gently, insert until it clicks.
3. Load paper: Adjust paper guides in the tray, load paper (plain, letter/A4), and ensure guides are snug.
4. Connect power cord to the printer and then to a grounded electrical outlet.
5. Connect to computer: Use the USB cable to connect the printer to your computer (for USB model).

WARNING! Do not touch the green drum surface of the toner cartridge. Avoid placing the printer in direct sunlight or high humidity.

First-Time Setup

Power on the printer; follow on-screen prompts on your computer if installing drivers.

1. Install software: Insert the supplied CD or download drivers from the Brother website. Follow the installation wizard.
2. Network setup (for network model): Use the control panel or software to configure the IP address.
3. Print a test page: From the driver properties or control panel, select to print a configuration page to verify operation.
4. Set default preferences: Configure paper size, print quality, and other defaults in the printer driver.

CAUTION! Ensure the printer is on a flat surface to prevent paper jams. Keep the area around the printer clear for ventilation.

Specifications

• Type: Monochrome Laser All-in-One (Print, Copy, Scan).
• Print Speed: Up to 30 ppm.
• First Print Out Time: Less than 10 seconds.
• Recommended Monthly Duty Cycle: Up to 15,000 pages.
• Paper Sizes: Letter, Legal, A4, Executive, envelopes, labels, transparencies.
• Input Capacity: 250 sheets (standard tray).
• Output Capacity: 100 sheets (face-down).
• Scanner Type: Flatbed, Color.
• Interface: USB 2.0 Hi-Speed, 10/100Base-TX Ethernet.
• Power Consumption: Approx. 470W (printing), 65W (ready), 2W (sleep).
• Dimensions (W x D x H): Approx. 16.1" x 16.3" x 11.8".
• Weight: Approx. 24.3 lbs.

Controls and Settings

Access functions via the Control Panel LCD and buttons.

Control Panel: POWER, Start/Stop, Navigation arrows, OK, Back, Menu, Copy, Scan, Fax (PC-FAX mode).

Menu Settings: Report (Print Configuration, Network Config), Machine Info, Reset, Defaults, Network (for network models).

Driver Settings: Print Quality (Economy, Normal, Best), Duplex, Toner Save, Paper Size, Orientation, Watermark, N-Up printing.

Copy Settings: Number of Copies, Darkness, Reduce/Enlarge (25%-400%), ID Copy (copy two sides of an ID card onto one page), N-Up (2/4/8 in 1).

Connecting Devices

USB: Connect directly to a computer. Network: Connect via Ethernet cable to a router/switch.

1. Turn off the printer before connecting cables.
2. For USB: Connect the USB cable to the printer and computer. Turn on the printer.
3. For Network: Connect an Ethernet cable from the printer to your network. Use the control panel to obtain an IP address automatically or set manually.
4. Install the driver, selecting the connection type during setup.

Tip: For network installation, print a Network Configuration Report from the menu to verify the IP address.

Printing & Copying

Supports printing from applications, direct copying, and PC-FAX.

1. Printing: Select 'Print' from your application, choose Brother DCP-8070D as the printer, adjust settings as needed, and click Print.
2. Copying: Place document face-down on the scanner glass or face-up in the ADF (if equipped). Use the control panel to set copy options (number, darkness, size). Press Start.
3. Duplex Printing/Copying: Enable in the driver (printing) or select from the copy menu (for 2-sided to 2-sided copies).
4. PC-FAX: Requires fax software installed on your computer. Use the software to send and receive faxes through the printer's modem.

WARNING! Do not use damaged paper. Always fan paper before loading to prevent multiple sheets feeding.

Scanning

Scan to computer, email, network folder, or OCR application.

1. Place document on scanner glass or in ADF.
2. Initiate scan: Press the Scan button on the control panel, or use the Brother software (ControlCenter) on your computer.
3. Select destination: Scan to Image, File, OCR, Email, or Network.
4. Configure settings: Resolution, color mode, file format (PDF, JPEG, etc.), and file name.
5. Start the scan.

Note: For best OCR results, use 300 dpi or higher resolution.

Maintenance & Care

Unplug the printer before cleaning. Use a dry, soft cloth. Do not use alcohol or solvents.

• Exterior: Wipe with a dry cloth.
• Scanner Glass: Clean with a soft, lint-free cloth slightly dampened with water. Dry thoroughly.
• Paper Path: Keep rollers clean. Refer to manual for cleaning instructions if paper jams are frequent.
• Toner Cartridge: Replace when print quality fades or toner low message appears. Recycle used cartridges.

CAUTION! Do not touch the transfer roller or imaging drum. Keep the printer free of dust and paper clips.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star® qualified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not responding	Cables/power/driver	Check power and cable connections. Reinstall printer driver.
Poor print quality	Toner low/drum/dirty	Replace toner cartridge. Run the Drum Cleaning utility in the driver.
Paper jams	Paper loaded incorrectly/damaged	Open covers and carefully remove jammed paper. Reload paper correctly.
Scanner not working	Software/connection	Ensure Brother software is installed. Restart the printer and computer.
Network connection failed	Cable/IP settings	Check Ethernet cable and router. Print Network Config report to verify IP settings.
PC-FAX not sending	Phone line/software	Ensure phone line is connected to LINE port. Check fax software settings.

Reset: Menu > Machine Info > Reset (resets all settings to factory default).

Service: 1-877-276-8437; support.brother.com