Brother DCP-8060 Manual

The Brother DCP-8060 is a multifunction laser printer offering printing, scanning, copying, and faxing capabilities. It features high-speed monochrome laser printing, automatic document feeder (ADF), flatbed scanner, PC-Fax functionality, USB and network connectivity, and energy-saving modes. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Laser print engine, Flatbed scanner, Automatic Document Feeder (ADF), Control panel with LCD, Paper trays, Toner cartridge, USB and Ethernet ports.

Feature	Description
Print Speed	Up to 30 pages per minute (ppm)
Print Resolution	Up to 1200 x 1200 dpi
Automatic Document Feeder (ADF)	Holds up to 50 sheets for scanning/copying/faxing
Flatbed Scanner	For books, photos, and single documents
Copy Functions	Reduce/Enlarge, N-up printing, ID Copy
Fax Capability	PC-Fax, Super Fine, Memory reception
Connectivity	USB 2.0, Ethernet (10/100 Base-TX)
Paper Capacity	250-sheet input tray, 50-sheet ADF
Toner Cartridge	TN-630 standard yield cartridge
Control Panel	LCD display, navigation buttons, numeric keypad

Installation

Unpack and inspect contents. Place on a stable, level surface near a power outlet.

1. Remove all packaging materials and tape from inside and outside the unit.
2. Install the toner cartridge: Open front cover, remove cartridge from packaging, shake gently, insert into slot until it clicks.
3. Load paper: Adjust paper guides in the input tray, load up to 250 sheets of plain paper.
4. Connect power cord to the printer and a wall outlet.
5. Connect to computer: Use USB cable to connect to PC, or connect Ethernet cable for network use.

WARNING! Do not touch the green drum surface of the toner cartridge. Avoid placing in direct sunlight or humid environments.

First-Time Setup

Power on the printer; follow on-screen prompts on the LCD or computer.

1. Install drivers: Insert the supplied CD or download latest drivers from Brother website.
2. Configure network (if applicable): Use the control panel to set IP address or use automatic DHCP.
3. Test print: Print a configuration report from the menu to verify operation.
4. Set date/time: Important for fax functions; configure via control panel menu.
5. Adjust default settings: Set paper size, print quality, and energy saver mode as needed.

CAUTION! Ensure proper ventilation; keep at least 4 inches of space on all sides.

Specifications

• Print Technology: Monochrome laser.
• Print Speed: Up to 30 ppm.
• First Print Out Time: Less than 10 seconds.
• Recommended Monthly Duty Cycle: Up to 10,000 pages.
• Scanner Type: Flatbed + ADF, CIS color scanner.
• Scan Resolution: Up to 1200 x 1200 dpi.
• Fax Transmission Speed: Approx. 3 seconds per page (Super Fine mode).
• Memory: 32 MB standard.
• Paper Sizes: Letter, Legal, Executive, A4, A5, B5, envelopes.
• Power Requirements: 120V AC, 60Hz.
• Operating Environment: Temperature 50-90°F (10-32°C), Humidity 20-80% RH.

Controls and Settings

Access functions via the control panel LCD and buttons.

Control Panel: POWER, START (for copy/scan), STOP/EXIT, numeric keypad, navigation arrows, OK, MENU, FAX, COPY, SCAN.

Menu Settings: Report Print, Network Config, Fax Settings (Line, Ring Delay, ECM), System Setup (Date/Time, Language, Factory Reset), Print Settings (Density, Toner Save, Timeout).

Software Settings: Brother ControlCenter for scanning, Web Based Management for network configuration, Printer Driver settings for print quality, duplex, watermark, etc.

Connecting Devices

USB: Direct connection to a single PC. Network: Ethernet connection for multiple users.

1. Turn off printer and computer before connecting cables.
2. For USB: Connect USB cable to printer and computer.
3. For Network: Connect Ethernet cable from printer to router/switch.
4. Power on devices and install drivers as prompted.
5. Verify connection by printing a network configuration report.

Tip: Use a shielded USB cable no longer than 10 feet for reliable connection.

Printing & Scanning

Supports printing from applications, copying, and scanning to PC or network folder.

1. Printing: Select "Brother DCP-8060" as printer in application, adjust properties as needed, click Print.
2. Copying: Place document on flatbed or in ADF, use control panel to set number of copies, density, size, press START.
3. Scanning: Place document, use Brother ControlCenter software on PC to select destination (file, email, OCR), press SCAN button on printer or click Scan in software.
4. Advanced Functions: 2-sided (duplex) printing, N-up (multiple pages per sheet), poster printing, watermark.

WARNING! Do not place heavy objects on scanner glass. Keep ADF clean from staples or paper clips.

Fax Functions

Configure telephone line connection and settings for sending/receiving faxes.

1. Connect telephone line cord from wall jack to LINE port on printer.
2. Set date/time and station ID (your fax number/name) in FAX menu.
3. To send a fax: Place document, dial number using keypad or speed dial, press START.
4. To receive fax: Set mode (Auto, Manual, Fax/Tel). In Auto mode, printer answers after set rings.
5. Use PC-Fax to send faxes directly from your computer without printing.

Note: Enable Error Correction Mode (ECM) for better transmission over noisy lines.

Maintenance & Supplies

Regular maintenance ensures optimal performance and longevity.

• Toner Replacement: Replace TN-630 cartridge when print quality fades or low toner message appears.
• Cleaning: Wipe exterior with soft, dry cloth. Clean scanner glass with lint-free cloth and glass cleaner.
• Paper Handling: Use recommended paper types. Store paper in a dry place. Keep rollers clean.
• Drum Unit: The drum unit (inside toner cartridge) has a lifespan; replace entire cartridge when necessary.
• Waste Toner Box: Built into cartridge; no separate box to replace.

CAUTION! Unplug printer before cleaning. Do not use abrasive cleaners or compressed air inside the unit.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star qualified. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-267-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not powering on	Power cord, outlet	Check power connection; try different outlet; ensure power switch is on.
Poor print quality	Toner low, drum, paper	Replace toner cartridge; clean corona wire; use recommended paper.
Paper jams	Paper type, worn rollers	Clear jammed paper following guide; check for debris; replace rollers if worn.
Scanner not working	Driver, connection	Reinstall scanner driver; check USB/network connection; restart devices.
Fax transmission fails	Line, settings	Check telephone line connection; verify recipient number; enable ECM.
Network connection lost	IP conflict, cable	Print network config report; renew IP address; check Ethernet cable.

Reset: Menu > Initial Setup > Reset > All Settings (if needed).

Service: 1-877-267-8437; support.brother.com