Brother DCP-1610W(E) manual

The Brother DCP-1610W(E) is a multifunction monochrome laser printer offering print, copy, and scan capabilities with wireless connectivity. It features a compact design, automatic document feeder (ADF), duplex printing, mobile printing support, and energy-saving functions. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Monochrome laser engine, Automatic Document Feeder (ADF), Control Panel, Paper trays, Wireless antenna, USB port, Power connector.

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

1. Remove all packaging materials and tapes from inside and outside the printer.
2. Install the toner cartridge: Open front cover, remove protective tape from cartridge, insert until it clicks.
3. Load paper: Adjust paper guides in tray, load up to 250 sheets of plain paper.
4. Connect power cable to printer and wall outlet.

WARNING! Do not touch the green drum surface of the toner cartridge. Keep printer away from heat and humidity.

First-Time Setup

Power on printer; follow on-screen prompts on control panel.

1. Set language: Use control panel buttons to select language (default: English).
2. Connect to network: Use wireless setup wizard or connect via USB for initial configuration.
3. Install drivers: Insert installation CD or download from Brother website, follow on-screen instructions.
4. Test print: Print configuration report to verify installation.

CAUTION! Ensure proper ventilation; do not block air vents.

Specifications

• Functions: Print, Copy, Scan.
• Print Technology: Monochrome laser.
• Print Speed: Up to 20 ppm.
• First Print Out Time: Less than 10 seconds.
• Paper Sizes: A4, Letter, Legal, Executive, envelopes, labels.
• Scan Resolution: Up to 1200 x 1200 dpi (optical).
• Connectivity: Wireless, USB 2.0.
• Power Consumption: Approx. 370W (printing), 1.8W (sleep).
• Operating Environment: Temperature 10-32°C, humidity 20-80% RH.
• Dimensions (WxDxH): 406 x 359.6 x 231.3 mm.
• Weight: Approx. 9.5 kg.

Controls and Settings

Access menus via control panel LCD. Front Panel: Power button, LCD display, navigation arrows, OK, Back, Copy, Scan, Wireless, Cancel.

Menu Structure: Machine Info, Network, Print Settings, Copy Settings, Scan Settings, Maintenance.

Print Settings: Toner save mode, duplex, paper type, density. Copy Settings: Number of copies, darkness, reduce/enlarge, ADF or flatbed. Scan Settings: Resolution, file format, destination. Network: Wireless setup, WPS, IP address configuration. Maintenance: Print reports, clean drum, reset settings.

Connecting Devices

Wireless: Use WPS or manual setup. USB: Direct connection to computer.

1. Turn on printer and ensure wireless is enabled (wireless light on).
2. Press Wireless button on control panel to enter setup mode.
3. Select network from list and enter password using navigation buttons.
4. For USB, connect cable to computer and printer, install drivers when prompted.

Tip: Print network configuration report to verify wireless connection details.

Printing & Copying

Supports standard paper, envelopes, labels.

1. Printing: Send print job from computer or mobile device, ensure printer is selected.
2. Copying: Place original in ADF or on flatbed, use control panel to set copies and options, press Start.
3. Duplex: Enable in print settings or press Duplex button on control panel for copying.
4. Cancel job: Press Cancel button on control panel or delete from print queue on computer.
5. Toner Save: Enable in print settings or machine settings to extend toner life.

WARNING! Do not touch the fuser unit inside printer; it becomes hot during operation.

Scanning Features

Scan to email, computer, USB, or cloud services.

1. Place document in ADF or on flatbed glass.
2. Press Scan button on control panel or use Brother iPrint&Scan app.
3. Select scan destination (computer, email, USB).
4. Adjust settings (resolution, format, size) as needed.
5. Press Start to begin scanning.

Note: For scanning to computer, ensure Brother software is installed and scanner driver is configured.

Care & Maintenance

Unplug before cleaning. Use dry, lint-free cloth; do not use alcohol or solvents.

1. Exterior: Wipe with dry cloth.
2. Paper path: Use clean, dry cloth to remove paper dust.
3. Toner cartridge: Replace when toner low message appears or print quality fades.
4. Drum unit: Replace after approx. 12,000 pages (indicator on unit).

CAUTION! Use only Brother genuine toner and parts. Do not refill toner cartridges.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE marked. RoHS compliant. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437 (USA).

Troubleshooting

Reset: Menu > Maintenance > Reset Settings if needed.

Service: 1-877-276-8437; support.brother.com