Brother DCP-1510(E) manual

The Brother DCP-1510(E) is a compact, all-in-one monochrome laser printer featuring printing, copying, and scanning capabilities. It offers fast printing speeds, automatic duplex printing, energy-saving modes, and easy connectivity via USB. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Monochrome laser engine, flatbed scanner, control panel, paper tray, toner cartridge, USB port.

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

1. Remove all packaging tape and protective materials from inside and outside the printer.
2. Install toner cartridge: Open front cover, remove cartridge from packaging, shake gently, insert until it clicks.
3. Load paper: Adjust paper guides in tray, load up to 150 sheets of plain paper.
4. Connect power cord to printer and wall outlet.
5. Connect USB cable to computer (if setting up immediately).

WARNING! Do not touch the green drum surface of the toner cartridge. Avoid exposure to direct sunlight or high humidity.

First-Time Setup

Power on printer; follow on-screen prompts on computer if installing drivers.

1. Install software: Insert provided CD or download drivers from Brother website. Follow installation wizard.
2. Configure printer settings: Use control panel to set language, date/time, and default print mode.
3. Test print: Print a test page from driver utility or by holding down the 'Go' button for 3 seconds.
4. Register product online for warranty and support updates.

CAUTION! Ensure proper ventilation; keep at least 10cm clearance on all sides.

Specifications

• Type: Monochrome Laser All-in-One (Print, Copy, Scan).
• Print Technology: Laser electrophotography.
• Print Speed: Up to 20 ppm.
• First Print Out Time: Less than 10 seconds.
• Recommended Monthly Duty Cycle: Up to 8,000 pages.
• Paper Sizes: A4, Letter, Legal, Executive, envelopes, labels, transparencies.
• Scanner Type: Flatbed, CIS.
• Interface: USB 2.0.
• Power Requirements: 220-240V AC, 50/60Hz.
• Operating Environment: Temperature 10-32.5°C, Humidity 20-80% RH.

Controls and Settings

Access functions via control panel buttons and LCD display.

Control Panel: Power button, LCD (2-line), Navigation arrows, OK, Stop/Exit, Black Start (Copy), Color Start (Scan), Toner Save, Report.

Menu Settings: Language, Paper Size, Default Print Quality, Toner Save mode, Sleep Timer, Network Config (if applicable), Factory Reset.

Software Settings: Driver settings for print quality, duplex, watermark, page layout. Scan software settings for resolution, file format, destination.

Connecting to Computer

USB connection for direct printing and scanning.

1. Ensure printer and computer are turned off.
2. Connect USB cable (Type B to Type A) to printer and computer.
3. Turn on printer, then start computer.
4. OS should detect new hardware; install drivers if prompted.
5. Set as default printer in computer's Devices/Printers settings.

Tip: Use a high-quality USB cable no longer than 3 meters for reliable communication.

Printing & Copying

Supports standard and advanced printing/copying functions.

1. Printing: Select 'Brother DCP-1510' as printer in application. Configure job properties (duplex, quality, copies) via print dialog.
2. Copying: Place original on scanner glass or in ADF (if equipped). Use control panel to set number of copies, darkness, reduction/enlargement (25-400%). Press Black Start.
3. Multiple Copies: Up to 99 copies from a single original.
4. N-up Printing: Print 2 or 4 pages on a single sheet via driver settings.
5. Poster Printing: Print large document across multiple pages.
6. Watermarks: Add text (e.g., CONFIDENTIAL) as background.

WARNING! Do not use damaged, curled, or wet paper. Use only recommended media types.

Scanning Features

Scan to image file, email, OCR, or application.

1. Scan to File: Use Brother ControlCenter software to scan to PDF, JPEG, TIFF, etc.
2. Scan to Email: Configure email settings in software to scan and attach directly.
3. Scan to OCR: Scan text documents for editing in word processor.
4. Scan Settings: Adjust resolution (up to 1200 dpi), color mode (B&W, grayscale, color), scan area.

Maintenance & Cleaning

Unplug power cord before cleaning exterior. Regularly clean to ensure optimal performance.

1. Exterior: Wipe with soft, dry cloth. For stubborn stains, dampen cloth with water only.
2. Scanner Glass: Clean with lint-free cloth and glass cleaner. Avoid spraying directly on glass.
3. Paper Path: Use clean, dry cloth to remove dust or paper particles.
4. Toner Spills: Use dry cloth; do not use vacuum cleaner unless designed for toner.

CAUTION! Do not use alcohol, ammonia, or abrasive cleaners. Never touch the transfer roller or imaging drum.

Regulatory Information

CE compliant. RoHS compliant. Energy Star qualified. Waste Electrical and Electronic Equipment (WEEE) directive compliant. For EU: This product must not be disposed of with household waste. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact your local Brother customer service.

Troubleshooting

Reset: Hold down 'Go' button for 10 seconds to reset to factory defaults if needed.

Service: support.brother.com; check warranty for authorized service centers.