Brother DCP-110C Manual

The Brother DCP-110C is a multifunction device combining printing, copying, and scanning capabilities. It features a flatbed scanner, monochrome laser printing, USB connectivity, and a compact design suitable for home or small office use. Below are key sections covering setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Flatbed scanner, Laser print engine, Control panel, Paper tray, USB port, Power connector.

Feature	Description
Print Technology	Monochrome laser
Print Speed	Up to 20 pages per minute
Scanner Type	Flatbed color scanner
Copy Speed	Up to 12 copies per minute
Connectivity	USB 2.0
Paper Capacity	Up to 150 sheets (standard tray)
Control Panel	LCD display, function buttons, numeric keypad
Power Button	Turns device on/off
Start/Stop Button	Initiates or cancels operations
Menu Button	Accesses device settings

Installation & Setup

Unpack and inspect contents. Place on stable, level surface near power outlet.

1. Install toner cartridge: Open front cover, remove packaging, insert cartridge until it clicks.
2. Load paper: Adjust paper guides in tray, load up to 150 sheets of plain paper.
3. Connect power: Plug power cord into device and wall outlet.
4. Connect to computer: Use USB cable to connect device to computer USB port.
5. Install software: Insert driver CD or download from Brother website, follow on-screen instructions.

WARNING! Do not touch the green drum surface of the toner cartridge. Avoid exposure to direct sunlight or high humidity.

Specifications

• Print Resolution: Up to 2400 x 600 dpi.
• Scan Resolution: Up to 600 x 2400 dpi (optical).
• Copy Resolution: Up to 600 x 600 dpi.
• Media Sizes: Letter, Legal, Executive, A4, envelopes.
• Interface: USB 2.0 Hi-Speed.
• Power Consumption: Approx. 350W (printing), 65W (ready), 5W (sleep).
• Operating Environment: Temperature 10-32.5°C, humidity 20-80% RH.
• Dimensions (W x D x H): Approx. 406 x 435.5 x 250 mm.
• Weight: Approx. 9.5 kg.

Controls & Functions

Access functions via control panel buttons and LCD display.

Control Panel: Power, Start/Stop, Menu, Up/Down arrows, OK, Copy, Scan, Numeric keypad.

LCD Display: Shows status, settings, error messages, copy count, etc.

Menu Functions: Device settings, report printing, default settings, maintenance.

Copy Settings: Number of copies, darkness, reduce/enlarge, paper size.

Scan Settings: Resolution, file format, destination.

Printing Operations

Ensure device is powered on and connected to computer.

1. Send print job from computer application (File > Print).
2. Select Brother DCP-110C as printer.
3. Adjust print settings as needed (properties, preferences).
4. Click Print; device will process and output pages.
5. For manual feed: Insert paper into manual slot when prompted.

Tip: Use genuine Brother toner for best results. Monitor toner level via driver or status report.

Copying Operations

Standalone copying without computer.

1. Place original face down on scanner glass or face up in ADF (if equipped).
2. Use numeric keypad to enter number of copies (1-99).
3. Adjust settings: Darkness (Light/Dark), Reduce/Enlarge (50-200%), Paper size.
4. Press Start; device scans and prints copies.
5. Press Stop to cancel during operation.

Note: For multiple copies, device scans once then prints requested quantity.

Scanning Operations

Scan to computer using installed driver software.

1. Place original on scanner glass.
2. Launch scanning software (ControlCenter, Windows Fax and Scan, etc.).
3. Select scan settings: Color mode, resolution, file format (PDF, JPEG, etc.), destination.
4. Click Scan; image is sent to computer.
5. For quick scan, some software allows one-touch scanning via device button.

Tip: Higher resolution increases file size and scan time. Use 300 dpi for documents, 600 dpi for photos.

Maintenance & Care

Unplug device before cleaning.

1. Exterior: Wipe with soft, dry cloth. For stubborn stains, dampen cloth with water only.
2. Scanner glass: Clean with soft, lint-free cloth and glass cleaner. Avoid spraying directly on glass.
3. Paper path: Remove paper jams carefully following guide in manual.
4. Toner replacement: Replace when toner low indicator appears. Use Brother TN-360 cartridge.

CAUTION! Do not use alcohol, ammonia, or abrasive cleaners. Do not touch the transfer roller or drum.

Driver & Software

Required for full functionality with computer.

• Driver: Enables printing and scanning from applications.
• ControlCenter: Software for one-touch scanning, OCR, emailing scans.
• Installation: Use CD or download from support.brother.com.
• Updates: Check website periodically for latest driver updates.
• Compatibility: Windows XP/Vista/7/8/10, Mac OS X.

Note: For network sharing, install driver on each computer or use Windows printer sharing.

Regulatory Information

FCC Part 15 Class B: Complies with limits for digital devices in residential environments. Energy Star: Meets energy efficiency guidelines. RoHS: Compliant with restriction of hazardous substances. Copyright © Brother Industries, Ltd. For support, visit support.brother.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord, outlet	Ensure power cord plugged in securely; try different outlet.
Paper jams	Paper loaded incorrectly, worn rollers	Open covers, remove jammed paper carefully; reload paper properly.
Poor print quality	Low toner, dirty drum	Replace toner cartridge; clean inside of device (if applicable).
Device not recognized	USB cable, driver	Check USB connections; reinstall driver; try different USB port.
Scanner not working	Software, connections	Ensure scanning software installed; check original placement; restart device.
Error messages on LCD	Various internal issues	Refer to manual error code list; power cycle device; contact support.

Reset: Turn device off and on. For persistent issues, perform factory reset via menu (caution: erases settings).

Service: 1-877-276-8437; support.brother.com